m² × / m²
Double action pump Pro, used
Leider ist dieser Artikel in deiner Region nicht verfügbar. ✔️Item in very good condition with minor signs of use (see photos)
The MINT LAMA double lift pump has a 30% higher volume to inflate the board faster and more efficiently.
| Artikelnummer | Occasion-ML-HP9-GRI |
| Farbe | White |
| Material | Plastic, aluminum |
| Produktgewicht | 1.15 kg |
| Produktdimensionen |
Länge: 66.0 cm Breite: 27.0 cm Höhe: 9.0 cm |
| Verpackungsgewicht | 1.3 kg |
| Verpackungsmasse |
Länge: 90.0 cm Breite: 25.0 cm Höhe: 16.0 cm |
| Packungsinhalt | Double lift pump |
The Double lift pump ML-HP9 by MINT LAMA stands out from traditional pumps. With 30% more volume, it not only inflates your board faster but also more efficiently. That means a time saving of about 30% – a real win for those who want to maximize their time on the water!
Apart from its impressive volume, the pump is built to last and delivers reliable performance, making it the perfect choice for serious athletes and recreational paddlers alike.
The pump’s innovative double lift functionality comes with two adjustable modes:
- Mode 1 (Fast) offers a high capacity of 5.2 liters for quick inflation, while
- Mode 2 (Easy) with 2.6 liters at a max of 20 psi allows for high pressure and easier fine-tuning of air pressure.
This flexibility makes the ML-HP9 the ideal pump for different conditions and needs.
With the Double lift pump ML-HP9 from MINT LAMA, you're all set to enhance your paddleboarding experience and enjoy more time on the water. Whether you're a pro or just out for fun, this pump delivers the performance and quality you need.
How long do I need to inflate the board?
This depends on the volume of the board, so it is not possible to give an exact time. With the MINT LAMA 2.6 litre double-stroke pump, it usually takes between 5 and 10 minutes, depending on your physical condition. Thanks to the 30% higher volume compared to conventional pumps, you save a remarkable amount of time. Initially, the double stroke function helps to inflate the volume of the board more quickly. As soon as it gets harder, the single function is recommended. If the warm-up before paddling is too much for you, you can switch to the MINT LAMA electric pump. This can be operated with a rechargeable battery or via the car 12V connection.
What pressure do I need to inflate the board to?
Most boards need to be inflated to 15 PSI, which corresponds to approx. 1 bar. The exact pressure required by the board is usually stated on the valve itself or in the operating instructions. We recommend inflating the MINT LAMA SUPs to 13/14 PSI, as very good stability is already achieved at 13/14 PSI.
Important note: The board is designed for a maximum inflation pressure of 15 PSI. If the board is left in the sun for a longer period of time, the pressure in the board can increase significantly due to the heat. To avoid overstretching or cracking, it is strongly recommended to reduce the pressure. After sunbathing, the pressure can be increased again and the SUP can be put into use. When the board is in the water (even longer), the water temperature reduces the risk of overstretching. Damage caused by overheating is not covered by the warranty.
Why is the pressure gauge on my pump not moving?
The board needs a certain basic volume of air / pressure until the pressure gauge (the pressure indicator) moves. This only starts at approx. 7 PSI (= approx. 110 pump strokes). Therefore, the display is often not broken, but there is a lack of pressure in the board.
This depends on the volume of the board, so it is not possible to give an exact time. With the MINT LAMA 2.6 litre double-stroke pump, it usually takes between 5 and 10 minutes, depending on your physical condition. Thanks to the 30% higher volume compared to conventional pumps, you save a remarkable amount of time. Initially, the double stroke function helps to inflate the volume of the board more quickly. As soon as it gets harder, the single function is recommended. If the warm-up before paddling is too much for you, you can switch to the MINT LAMA electric pump. This can be operated with a rechargeable battery or via the car 12V connection.
What pressure do I need to inflate the board to?
Most boards need to be inflated to 15 PSI, which corresponds to approx. 1 bar. The exact pressure required by the board is usually stated on the valve itself or in the operating instructions. We recommend inflating the MINT LAMA SUPs to 13/14 PSI, as very good stability is already achieved at 13/14 PSI.
Important note: The board is designed for a maximum inflation pressure of 15 PSI. If the board is left in the sun for a longer period of time, the pressure in the board can increase significantly due to the heat. To avoid overstretching or cracking, it is strongly recommended to reduce the pressure. After sunbathing, the pressure can be increased again and the SUP can be put into use. When the board is in the water (even longer), the water temperature reduces the risk of overstretching. Damage caused by overheating is not covered by the warranty.
Why is the pressure gauge on my pump not moving?
The board needs a certain basic volume of air / pressure until the pressure gauge (the pressure indicator) moves. This only starts at approx. 7 PSI (= approx. 110 pump strokes). Therefore, the display is often not broken, but there is a lack of pressure in the board.
Artikel zum Warenkorb hinzugefügt
SKU: